Digital Equipment Corporation RAID Array 3000 storage subsystem Guide d'installation télécharger pdf (Page 12)

RAID Array 3000 Pedestal Enclosure

1–2 EK–SM3KC–IG. A01

Figure 1–1 Second Controller Pedestal Slot Location

-4

Second

Contro ller

Slot

2.0 Installation Procedure

CAUTION

To prevent an electrical discharge from damaging

the SIMMs, always wear an ESD wrist strap con-

nected to a suitable ground when handling the

memory modules.

1. Ensure that the UltraSCSI bus is in a quiescent state (no I/O activity).

2. Shut down the host system.

3. Issue a “shutdown” command from the SWCC console to the pedestal con-

troller.

4. Power off the pedestal(s) and the UPS.

5. Perform an inventory of the items contained in the second controller kit op-

tion. The kit should contain the following:

•

RAID Array 3000 controller

•

3 SIMMs

•

Model label

•

Warranty Card

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Digital Equipment Corporation RAID Array 3000 storage subsystem Guide d'installation Page 12