Digital Equipment Corporation RAID Array 3000 storage subsystem Guide d'installation télécharger pdf (Page 13)

Second Controller Option

EK–SM3KC–IG. A01 1–3

6. Install two of the SIMM modules into the second controller (make sure all

modules are of the same type) by aligning the connector pins and inserting

the modules into the SIMM module connectors as shown in Figure 1-2.

Figure 1–2 Insert Module into SIMM Connector

7. Ensure the module is firmly seated and then gently pivot it toward the con-

troller board until it snaps into place as shown in Figure 1-3.

Figure 1–3 Pivot Module Down to Seat

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Digital Equipment Corporation RAID Array 3000 storage subsystem Guide d'installation Page 13